Granite Countertop Dishwasher Installation Kit

The Granite Countertop Dishwasher Installation Kit is designed to facilitate the installation of an undercounter dishwasher without the need for drilling holes to mount the screws. This kit is approved for use with granite, quartz, acrylic, and other solid surface countertops.

The kit includes two dishwasher brackets and the necessary hardware. The installation process is straightforward and does not require any glue, drilling, or messy procedures.

The installation instructions are as follows:

1. Thoroughly clean the mounting area on the underside of the countertop using an alcohol-based solution.
2. Open the dishwasher door to expose the dishwasher mounting brackets.
3. Install the adhesive tabs supplied in the kit using the provided set screw, attaching them to each of the dishwasher mounting brackets.
4. Once the adhesive tabs are installed on the dishwasher, peel back a corner of the red protective liner to make it easier to remove the liner when the dishwasher is positioned under the countertop.
5. With the adhesive tabs in place, position the dishwasher underneath the countertop, adjusting the depth and left-to-right positioning as needed. Once the dishwasher is in the correct position, completely remove the red liner.
6. Firmly press the adhesive tabs to the countertop and hold for 30 seconds. Then, use a clamping aid to clamp the adhesive tabs in place for 5 minutes. After 5 minutes, the bond will be set and will fully cure in one hour.

This Granite Countertop Dishwasher Installation Kit is compatible with most dishwashers and is approved for use with a variety of solid surface countertop materials, including granite, quartz, and acrylic. The easy-to-follow installation process eliminates the need for glue, drilling, and messy procedures, making it a convenient solution for installing an undercounter dishwasher.

product information: